PFR0.S10 VALVE SERIES
SAE Cartridge - 250 bar
Proportional Solenoid Valve
2 way proportional flow control
DESCRIPTION
The PFR0 is a proportional solenoid operated, poppet type, normally closed, screw-in hydraulic cartridge valve for low leakage
blocking and load-holding applications. When de-energized, the valve operates as a check valve and allows flow from 1 to 2, while
blocking flow from 2 to 1. When energized, the valve opens 2 to 1 flow path: flow is proportional to the current applied to the coil.
HYDRAULIC SYMBOL
Cavity
Cross section
SAE10
TECHNICAL DATA
MAXIMUM INTERNAL LEAKAGE
0,25 cm
3
/ min @ 30 bar
0,25 cm
3
/ min @ 250 bar
EXTERNAL COMPONENT TREATMENT
Zn/Fe - standard (96h)
Zn/Ni (720h) (Upon customer request)
MAXIMUM FLOW
70 l/min
MAXIMUM OPERATING PRESSURE
250 bar
WEIGHT
0,175 kg
SEAL KIT CODE
SK.032 and SK.087 (coil) (standard sealing NBR-BUNA-N)
OIL TESTING CONDITIONS
ISO VG 46 cSt
TECH. SPEC. FOR CHARACTERIZATION
see page 811
ORIENTATION
No restrictions
INSTALLATION TORQUE
55-65 Nm
FILTRATION
18/16/13 ISO 4406 (maximum filtration admitted)
VISCOSITIES
7,4 to 420 cSt
FLUIDS
Mineral-based or synthetics with lubricating properties
OIL TEMPERATURE RANGE
-30° C to 110° C
O-RING TEMPERATURE RANGE
-30° C to 110° C (standard sealing NBR - BUNA - N)
-35° C to 140° C (HNBR - Upon customer request)
-23° C to 225° C (FKM - Upon customer request)
Hex.27
COILS
26W (for more details see page 773 - 785)Performance and Validation test
performed with VIS products CCR1D.C12.L0 (12Vdc-26W) and CCR1D.
C24.L0 (24Vdc-26W)
P F R 0
.
ORDERING CODE
S 1 0 0
*
. .
N 0 0
Valve basic code
7/8-14 UNF with Ø15,86 nose size
Size
Marking
0 = Standard factory marking.
Customized marking can be
done upon request.
Model code Type of filter
N No filter
FILTRATION
Manual override
Model code Type of override
0 No override
1 Screw
PROPORTIONAL SOLENOID Valves
Specifications may change without notice.
741 742
PROPORTIONAL SOLENOID Valves
743 744
The performance chart illustrates flow handling capacity 2 to 1 (energized with
max current @24 Vdc and de-energized).
p/Q curves are recorded at TOil = 40°C and 46 cSt.
PFR0.S10 GRAPHS
Pressure vs. Flow
Note
The performance chart illustrates flow handling capacity 2 to 1 (energized with max current @24 Vdc and de-energized).
p/Q curves are recorded at TOil = 40°C and 46 cSt.
Flow vs current at 30 bar
Note
The performance chart illustrates flow regulation.
Current percentage referred to steady-state current of the coil. PWM frequency set to 150 Hz.
Q/I curves are recorded at Toil = 40°C and 46 cSt (energized @12 vdc and @24 Vdc).
Flow vs current at 15 bar
Note
The performance chart illustrates flow regulation.
Current percentage referred to steady-state current of the coil. PWM frequency set to 150 Hz.
Q/I curves are recorded at Toil = 40°C and 46 cSt (energized @12 vdc and @24 Vdc).
Flow vs current at 250 bar
Note
The performance chart illustrates flow regulation.
Current percentage referred to steady-state current of the coil. PWM frequency set to 150 Hz.
Q/I curves are recorded at Toil = 40°C and 46 cSt (energized @12 vdc and @24 Vdc).